fbpx

WE HAVE YOUR SIX

Don’t leave anything to chance, go with a proven solution preferred by professionals

priortize & accessorize

Blac-Rac is a paradigm shift in gun rack technology. Designed from the ground up to secure AR type weapons, the 1082 and 1070 utilizes two opposing side plates that secure the weapon while protecting the take down pins, magazine release, and trigger from tampering.  The unique design does not interfere with the top rail and hand guards so there is no need to remove any installed accessories like an optic, a laser or flashlight.  The single point mounting system provides enough clearance for weapons with up to a 30-round magazine to be installed.  

The 1082 and 1070 can also be used to secure a variety of other firearms like conventional stock rifles, shotguns, handguns, and dozens of other widely used tactical weapons. 

dual 1070 gun racks mounted in rzr utv holding ar15

strength & durability

The 1082 is manufactured from hardened 304 stainless steel to achieve superb strength and corrosion resistance.  Our parts are machined to tight tolerances to ensure years of worry free service and reliable operation.

splash-materials

modern ELECTRONICS

Blac-Rac designs our racks to be smarter. Our electronics are designed to provide the highest level of security and reliability while keeping the installation process simple.

splash

gun rack models

Model 1082

Multi-weapon gun rack accommodates pistol grip weapons like the AR15/M4 as well as conventional stock weapons by using an available stock adapter.   

Available with electronic release and a key back-up or just a lock & key.

  • Accessory capable – no need to remove magazine, optics, lights, etc.
  • Stainless steel construction is highly resistant to corrosion
  • Covers takedown pins on AR/M4 style lowers
  • Built-In electronic timer delay
  • Adaptable to most weapons in the field by adjusting width or length or pull
  • Secures weapon tightly to eliminate vibrations
  • Single point mounting installation
  • Vertical handle operation for applications with less space

Note: If you received your Blac-Rac without an AR Retention Post use of the Blac-Rac Alta Trigger Guard is required for optimal security. The trigger guard must be installed with both roll pins on M4 style lowers.  Click here and refer to section 10 for further details.

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

AR Retention Post

  • Increases security of the gun rack and drastically lessens probability of accidental discharge  

Charger Stop

  • Prevents charging of your AR/M4 weapon with a simple bolt-on attachment

Model 1070

Mechanical multi-weapon gun rack accommodates pistol grip weapons like the AR15/M4 as well as conventional stock weapons by using an available adapter. 

Available with a lock & key or with a 3/8 padlock loop for a user provided lock.

 

  • Accessory capable – no need to remove magazine, optics, lights, etc.
  • Powder coated steel construction is highly resistant to corrosion
  • Covers takedown pins on AR/M4 platform
  • Secures weapon tightly to eliminate vibrations
  • Adaptable to most weapons in the field by adjusting width or length or pull
  • Single point mounting installation
  • Horizontal handle operation for applications with more space

AR Retention Post

  • Increases security of the gun rack and drastically lessens probability of accidental discharge  

Charger Stop

  • Prevents charging of your AR/M4 weapon with a simple bolt-on attachment

Model 4130

Pump shotgun gun rack designed for weapons like the Remington 870, Mossberg 500/590 and the Winchester 1200/1300.  

Available with electronic release and a key back-up or just a lock & key. 

  • Machined from aluminum billet for superior strength
  • Built-In electronic timer delay
  • Secures weapon tightly to reduce vibrations
  • Retro-Fit capable using industry standard mounting locations
  • Side saddle and optics friendly

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

Model 1088

Single-shot, break front, less-lethal launcher rack designed specifically for the LMT 40mm or similar models.

Available with electronic release and a key back-up or just a lock & key.

  • Accessory capable – no need to remove optics, lights, etc.
  • Stainless steel and aluminum construction is highly resistant to corrosion
  • Covers break pins
  • Built-In electronic timer delay
  • Secures weapon tightly to eliminate vibrations
  • Single point mounting installation
  • Vertical handle operation for applications with less space

Cold-Wire® Technology

  • Prevents the opening of the gun rack if the power wires are cut and an external power source is applied to the power wires.

elevate your existing blac-rac

WHEN IT'S NOT IN YOUR HANDS, IT'S IN OURS™

Partition mounting

 Our 18″ or 10″ T-Channel can bolt directly to a partition allowing up to two Blac-Rac gun racks to be installed.  Our T-Channel’s allow for vertical adjustment so you can get the perfect fit for your vehicle.  

CAUTION: The user is responsible for determining a suitable  installation location that can support the weight of the rack and weapon.

Stand alone mount

Our stand alone or freestand mounts  can be used for a variety of applications.  It allows the user to install up to two Blac-Rac’s side by side with a relatively small footprint.  A suitable flat surface or specialized vehicle mounts will be needed for proper installation. 

splash

We offer two sizes a 19″ which sits at 45 45 degree angle and a 22″ which sits at 5 degree angle.  Installations requires either a 9″ or 12″ base plate which the freestand is secured to.

overhead mounting

We offer a variety of tube mount sizes for installation to roll bars, grab handles or railings.  Don’t hesitate to  contact us with any questions.  

Open frame vehicles generally fall in this category. If you have any applications which require mounting to a round tube, check out our Tube Mounts.  We offer a large range and can produce custom sizes at an additional cost.